Materials:

CAST MATERIAL ONLY:

It conforms over compound curves and riveted surfaces with ease and can be stretched up to 130% without a primer. The pressure sensitive adhesive allows sliding the graphic into position until firm pressure is applied and reliable initial adhesion is achieved. Non-visible air release channels provide for easy installation and a smooth, color perfect appearance. 


All adhesive vinyl graphics are matched with an optimized matte finished overlaminate,  that has the same conformability and durability characteristics and is ideal for indoor and outdoor use where a flat sheen and minimal glare is required to conceal with different environments (satin and gloss finish versions are available for non-combat/recreational applications - NON Color Matched Application) 


All products are warranted to be free of defects in materials and manufacture at the time of shipment and meet the specification stated in the base film and overlamination film material product bulletin. A complete list of definitions and warranty guidelines are available in the applicable manufacturers product bulletins and commercial warranty brochures.


Flammability Testing:
A complete ASTM E-84 test report is available for base product flammability information.


Removal:
When constructed and used as described a fast and clean removal and end of graphics use is guaranteed by the base material manufacturer. Removal with heat and/or chemicals from most substrates within the warranty period at 10C (50F) minimum. (air and substrate) – see removal warranty.


Warranty and Limitations:
All products are warranted to be free of defects in materials and manufacture at the time of shipment and meet the specification stated in the base film and overlamination film material product bulletin. A complete list of definitions and warranty guidelines are available in the applicable manufacturers product bulletins and commercial warranty brochures.

The high performance, cast, pressure sensitive adhesive vinyl used for the MultiCam vinyl applications, is specifically designed for fleet, vehicle, boat, interior and exterior applications. 

Color Matching:

All MultiCam Adhesive Vinyl products have been produced with the highest quality materials and have been carefully color matched at our facilities. Image Craft is a Color Print Master facility and follows the color matching parameters using a GTi D50 light booth set up.

The “optical brightners” used in the print and laminating materials and the ink formulations may create a metamerism depending on the light source. With this shift in color some patterns may seem more “red-ish” or “green-ish” depending on the light source used (bright sunlight, shade, shadows, etc.). 

NOTE: Due to the nature of the different materials in the MultiCam product lines there will not be a 100% color match between adhesive vinyl products and fabric related applications in direct sunlight. 


ECONOMY VINYL 

The MultiCam Economy Vinyl Film has been specially developed to deliver consistent and reliable image quality Their easy handling and application makes them a good choice for all users. The MultiCam Economy film is a versatile intermediate film perfect for Sort-Term and Medium-term applications (flat and simple curves) 

The pressure sensitive adhesive allows sliding the graphic into position until firm pressure is applied and reliable initial adhesion is achieved. Non-visible air release channels provide for easy installation and a smooth, color perfect appearance. 


**** THE  ECONOMY MULTICAM PRODUCT LINE IS NOT INTENDED TO BE INSTALLED ON VEHICLES ****

VEHICLE APPLICATIONS WILL NOT BE WARRANTIED!


All adhesive vinyl graphics are matched with an optimized matte finished overlaminate,  that has the same conformability and durability characteristics and is ideal for indoor and outdoor use where a flat sheen and minimal glare is required to conceal with different environments (satin and gloss finish versions are available for non-combat/recreational applications - NON Color Matched Application) 


All products are warranted to be free of defects in materials and manufacture at the time of shipment and meet the specification stated in the base film and overlamination film material product bulletin. A complete list of definitions and warranty guidelines are available in the applicable manufacturers product bulletins and commercial warranty brochures.


Flammability Testing:
A complete ASTM E-84 test report is available for base product flammability information.

Warranty and Limitations:

All products are warranted to be free of defects in materials and manufacture at the time of shipment and meet the specification stated in the base film and overlamination film material product bulletin. A complete list of definitions and warranty guidelines are available in the applicable manufacturers product bulletins and commercial warranty brochures.


Color Matching:

All MultiCam Adhesive Vinyl products have been produced with the highest quality materials and have been carefully color matched at our facilities. Image Craft is a Color Print Master facility and follows the color matching parameters using a GTi D50 light booth set up.

The “optical brightners” used in the print and laminating materials and the ink formulations may create a metamerism depending on the light source. With this shift in color some patterns may seem more “red-ish” or “green-ish” depending on the light source used (bright sunlight, shade, shadows, etc.). 

NOTE: Due to the nature of the different materials in the MultiCam product lines there will not be a 100% color match between adhesive vinyl products and fabric related applications in direct sunlight.